Xilinx Zynq UltraScale+ MPSoC AI 100G Optical fiber HPC FPGA Core Board XCZU19EG

FPGA Chip

XCZU19EG--2FFVC1760I

Chip CPU

4x ARM Cortex-A53, 1.333GHz; Dual Core Cortex?-R5, 533MHz

Chip GPU

Mali?-400 MP2

Chip level

Speed grade -2, industrial grade, working temperature -40°c~85°C

PS-end High Speed Connection

PCIe Gen2 x4, 2x USB3.0, SATA 3.1, DisplayPort, 4x Tri-mode Gigabit Ethernet

PS-end General Connection

2x USB 2.0, 2x SD/SDIO, 2 x UART, 2 x CAN 2.0B, 2x I2C, 2x SPI, 4x 32b GPIO

Logic Cells

1,143K

CLB Flip-Flops

1,045K

Look Up Tables (LUTs)

523K

Global Clock

11

PCIE Gen 3x16

5

100G Ethernet

4

PL GTY 32.75Gb/s

28

Max. Distribu- ted RAM

9.8Mb

Total Block RAM

34.6Mb

UltraRAM

36Mb

DSP Slices

1968

150G Interlaken

4

PL GTH 16.3Gb/s

44

DDR4

PS DDR4, 4 Pieces of 1G DDR4, 4GB Total, 64bit, Data Speed 2400Mbps
PL has a 260 pin DDR4 sodimm socket (self purchased memory module is required)

QSPI Flash

Two pieces of 512Mbit QSPI flash, a total of 1024mbit, are used for the storage of zboot files, system files and user data of zynq chip

eMMC Flash

32GB eMMC FLASH memory chip, users store operating system files or other user data

PCIe x8 Slot

PCIe x8 slot 1-way PCIe x8 slot is used for PCIe x8 communication, connecting PCIe x8, x4, x2, x1 PCIe boards to realize PCIe data communication. It supports PCI Express 2.0 standard, and the single channel communication rate can be as high as 5gbaud.

DP Interface

Mini Display Port up to 4K@30Hz or 1080P@60Hz Output ( ALINX customized DP to HDMI cable, need to buy Separately )

100G Optical fiber interface

Four QSFP28 optical fiber interfaces provide independent transmission and reception channels, which can operate at 25Gbps at 100m of OM4 MMF, and the overall data rate is 100Gbps

FMC HPC

Two FMC HPC expansion ports, external Xilinx or ALINX FMC daughter boards ( HDMI input and output module, binocular camera module, high-speed AD module, etc )

CAN Bus Interface x2

Used for CAN Communication Service

RS485 Bus Interface x2

Used for 485 communication Service

MIPI Interface

1 channel Mipi camera input interface, used to connect Mipi camera module

M.2 NVME Interface

Used to Connect the M.2 SSD Solid State Drive ( Need to Buy it Yourself )

USB to serial port

PS and PL have one UART to USB interface respectively. Used for debugging communication with computer
The third UART port is led out from the PS end through a 1mm spacing, 10-PIN FPC connector, which can be connected to peripheral devices such as serial port screen

Ethernet interface

One Gigabit Ethernet interface at PL and PS ends respectively to exchange Ethernet data with computers or other network devices

USB 3.0 x4

Used to Connect External USB Peripherals

SMA Interface

3 pairs of differential SMA interfaces are used for external high-speed input and output signals

SATA Interface

4-way SATA interface for connecting peripherals such as hard disks

JTAG

10-pin 2.54mm standard JTAG port for downloading and debugging of field programmers

Clock Configuration

A passive crystal provides 32.768 KHz real-time clock source for PS system
A crystal oscillator provides 33.333MHz clock input for the PS section
A differential 200MHz PL system clock source for DDR4 controller reference clock

Real Time Clock

1 built-in RTC real-time clock

EEPROM

EEPROM 24LC04 with 1 piece of IIC interface

Temperature Sensor

Sensor Chip LM75, Used to Detect the Ambient Temperature

SD Card Slot

1 Micro SD Card Slot, Support SD Mode and SPI Mode

LED

1 power indicator, 1 DONE configuration indicator, 2 user indicators

KEYs

3 KEYs, 1 Reset KEY, 2 User KEYs

Voltage Input

+12V DC

Current Input

Max. Current 3A

FPGA Board

1

DC Fan (Fixed on the Board)

1

Mini USB Cable

1

USB Downloader Cable

1 Set

12V Power Adapter

1

Transparent Protection Board

1

TF Card

1

Card Reader

1

Size Dimension

165mm x 113.94mm

Number of Layers

Adopt 8-layer PCB design, and reserve independent power supply layer and GND layer